Steps to Setup a Brother Wireless Printer Using Control Panel?

If you have recently bought a wireless printer and you are struggling with the process to connect it to the computer as there are no cables like you had in your previous printer, the process of connecting a brother printer is quite simple. You can follow the steps provided below.
Steps-to-Setup-a-Brother-Wireless-Printer-Using-Control-Panel?
Before starting the setup of the wireless network, you must be aware of the network name, key, password, security key, encryption key, etc. This information is located on the side of WLAN router.

Follow These Steps and Set up a Touch Screen Wireless Device

  • The first thing that you need to do is to connect the AC power cable to the printer device and the power socket.
  • Press the power button on the device to turn it on.
  • Go to settings and click on the All Settings tab.
  • Choose network and tap on the WLAN option to select the Setup Wizard
  • It will display the “Switch Network Interface to Wireless”
  • Press Yes to open the setup menu and No to cancel
  • After this, the system will search and display all the available SSIDs
  • You can use touch the directional keys to open the menu; Select the desired SSID and click OK to finally connect to that network

Perform one of the Following Actions

  • Enter the network key if you are using the encryption and authentication process which depends on the network key.
  • You need to skip this step if your authentication method is Open System.
  • Tap Yes If the WLAN of your printer supports WPS and you see the notification “The selected access router support WPS
  • Press next at the prompt Start WPS on your wireless access point/router.
After a short while, you would see that “Connected” is displayed and the printer device will print a wireless status.
Aron Smith is an inventive person who has been doing intensive research in particular topics and writing blogs and articles on  Brother Printer Support   and many other related topics.

Comments

Post a Comment

Popular posts from this blog

How to Troubleshoot HP Printer Error Code 0Xc19a0041?

Image
These days, Hp Printers are one of the most renowned printers used by almost 300 million users across the globe. HP printer is designed and developed by American electronic company named as Hewlett-Packard since 1984. While the reliability factor is very high and also the technology that comes with the HP printers are very advance and changes according to time changes for serving better quality printers and performance. HP Printers are always working very smoothly, but while using the HP printers, some users are encountering an error code 0Xc19a0041. This HP Printer error code 0Xc19a0041 usually occurs when the printer’s Ink System Failed. However, this error may also occur from various reasons including: Improper installation of Ink. Due to delete any application or software incorrectly. Printer Driver not up-to-date. Network connection issues. Due to some reason HP printer is broken physically. And many more. However, this HP Printer error code might appear on the scree
Read more

How to Fix Canon Printer Error u052?

Image
There are two different scenarios related to U052 kind of error message. Here is a place where the print head is not installed at all and then it is giving the ‘U052 this type of print head is incorrect’ error message. While the printer is required the “new” print head.ad is installed but it is not doing work properly or probably not working at all. The below section will show step by step resolutions of both the scenarios. Message get for error:  The type of print head is not correct to install the correct print head U052 on your printer device Solutions for How to fix Canon printer error u052: Solution 1:  Remove and replace the cartridges in your printer. Solution 2:  Insert new cartridges tray in your printer. Solution 3:  Reset the print head to correct print issues or clear error. Solution 4:  Remove the print head: clean up the rear contacts with a cotton bud and surgical spirit. Now leave the all parts 5 minutes to dry. Install the print head software and the
Read more

How to connect hp printer to a wireless network

Image
If you don’t have deep technical knowledge related to HP printer device, you may get failed to connect to the wifi hp printer issue on your own. Though there are many reasons to come across such type of issue many of the time such an issue arises due to a communication problem with printer and computer. Please Follow the setup instructions to connect hp printer to a wireless network. The Wi-Fi pointer light ought to be touched off and additionally strong green. On the off chance that the Wi-Fi marker light isn’t orange, have a go at reconnecting to a remote system. Make sure that your computer and network are compatible. Double-click the software file. Turn on your printer. Follow the on-screen instructions until you reach the “Network” section. Select Network (Ethernet/Wireless). Click Yes, send my wireless settings to the printer. Wait for your printer to connect. Anyone can connect the computer to HP wireless printer easily via WPS which stands for Wi-Fi Protected Se
Read more